RP 01

Previous slide
Next slide

Acciaio inox 904L/Titanio Grado 5

Specifiche tecniche:

• Grade 5 Titanium case/ Stainless steel 904L.

• Titanium Grade 5 unidirectional ring.

• Case Back Grade 5 titanium.

• Winding crown Titanium grade 5.

• Crystal: Sapphir 5.50 mm

• Movement ETA 2824-2 Swiss Made, modified no date.

• Functions: Hours, Minutes, Seconds.

• Power reserve 38 hours.

• Frequency 28800 a/h.

• 25 Rubies.

• Dial with indexes and spheres SUPERLUMINOVA BGW9.

• Resistance 1000 metres.

• Suitable for saturation diving.

Watch size:

Diameter 44 mm

Lug size 22 mm

Thickness 15.4 mm

Lug to lug 51 mm

RP 01

"At the moment, sales only occur through email."

The RP01 reference was made in 3 variants:
Grade 5 titanium, 904L stainless steel, Grade 5 titanium / DLC.

Production is limited to 10 watches for each variant.

The case, the winding crown, the unidirectional bezel, the case back and the movement holder ring are machined from solid
Grade 5 titanium and 904L stainless steel following high production standards and using certified materials and advanced technological tools.
Each single component thus created is then finished manually by expert craftsmen.

The bezel with luminous index at 12 o’clock is unidirectional counterclockwise with 60 clicks.
The watch is available with Isofrane strap or leather strap and titanium buckle made in Italy.

The case is machined from solid starting from rectangular bars of Aluminum 6082 and lined internally with fine Alcantara.
The box containing the case is lined with neoprene so as to ensure the watch during transport from possible shocks.
Case and box are both made in Italy.

Each individual watch is tested at the equivalent pressure of 1500 meters below sea level, thus guaranteeing a large margin
of safety in extreme professional uses.
Other tests are also carried out regarding waterproofing in situations of thermal stress and mechanical resistance of the
straps, in order to guarantee the maximum reliability of our instruments.

Our watches are designed for use in saturation diving without the aid of the helium valve, this has been made
possible through a particular design and an accurate manufacturing technique.

Every single component is made in Italy involving over 20 companies present on the national territory,
this has made it possible to follow the production from the state of prototype to that of finished product, always putting the
quality.